Sensefly Ebee RTK

The eBee RTK features a built-in L1/L2 GNSS receiver. This allows it to receive correction data from most leading brands of base station. Its 16 MP camera can shoot imagery at a resolution of down to 1.5 cm/pixel. These images can then be transformed into orthomosaics & 3D models with absolute accuracy of down to 3 cm / 5 cm – without the need for GCPs.

  • rev-full1
    The world most popular mapping drone.
    The ebee is used all around the world for precise mapping and GIS applications.
  • rev-full1
    The ebee is very easy to use
    Easy deployable in most conditions and environments.

SURVEY-GRADE ACCURACY

Absolute orthomosaic / Digital Elevation Model accuracy of down to 3 cm (1.2 in), without the need for Ground Control Points.

FULLY INTEGRATED WORKFLOW

The eBee RTK's software connects to the base station and broadcasts corrections to the rover (eBee RTK) – no additional logger or third-party software required.

BASE STATION COMPATIBLE

The eBee RTK is compatible with most leading brands of base station, working seamlessly alongside your existing instruments.

The eBee RTK can be used in either of three different ways:

- Real Time Kinematic (positioning the base station on a known position) 

- Virtual base station (requires internet connection & VRS/Ntrip network subscription)

- Post processing (on-site or in the office later)

 

Ground Sensing

The eBee RTK's ground sensor is composed of a high-speed optical sensor and lens assembly that can estimate the distance to the ground with high accuracy. This sensor helps the eBee land softly, in more varied terrain, and with more precision than is possible using only GPS.

 

The eBee is lightweight enough to be launched by hand. It is fully autonomous during its entire flight. When it comes to landing, the eBee can either land in a circular clearing or, when space is limited, use its advanced ground sensing technology to make a fully autonomous straight-line landing.

The included eMotion 2 software lets you plan, simulate, monitor and control the trajectory of the eBee both before and during flight. With simple drag&drop actions you can designate the area to be mapped, generate a flight plan and with a single mouse click you can update your mission or return the eBee to its starting location.

  • 96cm wingspan
  • 630g take-off weight
  • 16MP camera, electronically
    integrated and controlled
  • Lithium polymer battery
  • 50 minutes of flight time
  • 36-57km/h (10-16m/s) cruise speed
  • Up to 45km/h (12m/s) wind resistance
  • Up to 3km radio link
  • Covers up to 1.5-10km2
  • eMotion 2
  • Ground sensor and reverse engine technology for linear landing
  • Postflight Terra 3D*

Danish Aviation Systems training center will make sure that you are being enabled to fully use and harvest the potential of the Ebee. A two-day training session give you the theoretical and practical foundation needed.

Our training center can host up to 14 students at a time and consist of elements such as software use, flight training, legislation and practical use.

When buying from Danish Aviation Systems you are secured highly skilled after sales support which make sure you gets the full potential out of your investment.

The eBee has a modular design, allowing the wings to be disassembled and stored with the central body and all its accessories in a small case. In fact the case is so small and lightweight that you can even take it as cabin baggage. The eBee will accompany you on all your projects.- IATA guidelines.